How To Start A Cd On Windows 10

Z7_3054ICK0KGTE30AQO5O3KA30N0

HP PCs - CD/DVD drive cannot read discs in Windows 10

When y'all load a disc into the CD/DVD bulldoze, the disc does non run or play. A dingy or scratched disc surface is the about common reason for a CD/DVD issue when inserted into a computer. If the optical drive cannot read the files stored on whatsoever CD/DVD discs, you need to troubleshoot the CD/DVD drive, rather than the discs and software. As well, y'all might need to reinstall the device commuter to resolve any errors or enable the AutoPlay setting to automatically start discs when loaded.

Confirm whether the disc is causing the outcome

A dirty or scratched disc surface is the most common reason for a CD/DVD issue when inserted into a calculator. Check the disc for damage and confirm that the disc is uniform with your reckoner.

Clean the disc and check for harm: Clean any dust or smudges from the disc with filtered h2o and a lint free cloth. If at that place is pregnant impairment to the playing surface, supercede the disc.
Test several different disc types: Load CDs and DVDs that are known to work in other disc players. If all discs of the same type do non play, make sure that the drive supports that disc blazon.
Blu-ray or DVD movie discs practice not play: Brand sure the bulldoze supports the disc type. If supported, install compatible movie playback software. Go to DVD playback options for Windows (in English) for more information.
Discs burned on a unlike computer do not play: Burn down the disc again using another brand of blank disc. Use a lower (4x) burning speed, and confirm that the burning session airtight upon completion.

Test the drive for a hardware failure

If the optical disc drive cannot read the files stored on any CD/DVD discs, you lot need to troubleshoot the CD/DVD drive, rather than the discs and software.

Over fourth dimension, vibration, dust, and mechanical wear affect CD/DVD drive operation. Utilize the HP PC Hardware Diagnostics tool to test the drive for hardware issues.

Plough off the computer.
Press the power push to turn on the figurer, so immediately press the esc fundamental repeatedly until the Startup Menu opens.
Printing f2 to open the HP PC Hardware Diagnostics UEFI.
Click Component Tests.
Click Optical Bulldoze, and and then run all the available tests. Take a working CD or DVD available to consummate the tests. Each test takes 1 to 2 minutes to run.
Follow any on-screen instructions to resolve any issues establish, and then test a disc in the bulldoze.

Verify the drive status in Device Manager

If the optical drive cannot read the files stored on whatever CD/DVD discs, you demand to ostend that the drive is listed in Device Manager.

Ostend the drive is listed in Device Director, and and so reinstall the device driver to resolve any error states.

Verify that in that location is no disc loaded in the drive.
In Windows, search for and open Device Manager.
Double-click DVD/CD-ROM drives to expand the category.
- If a CD/DVD bulldoze is non listed in DVD/CD-ROM drives, go to HP PCs - CD/DVD Drive Is Non Detected (Windows ten, 8).
- If a CD/DVD bulldoze is listed, go along to the next pace.
Right-click the bulldoze proper name, and and then select either Uninstall device or Uninstall.
Click Uninstall or similar to confirm the uninstall.
Shut all open programs, and and then restart the computer. Windows automatically configures the device.
Exam a disc in the bulldoze.

Enable AutoPlay

Enable the AutoPlay setting to automatically start discs when loaded.

In Windows, search for and open up Control Panel.
Click Hardware and Sound > AutoPlay .
Select the Employ AutoPlay for all media and devices setting.
Adjacent to each DVD, Blu-ray, and CD type, click the drop-down menu, select Ask me every time, and and so click Salve.
Test a disc in the drive.